24V 6.4Ah Battery For Electric Wheelchair

Installation and Use 

24V 6.4Ah with UN38.3, MSDS and KC certificated. This battery is suitable for electric wheelchair, lawn mower tooling, wire cutting equipment… etc.

1. Please check the remaining power of the battery pack before installation, press the power button, the SOC LED will flash, flashing green light indicates that the battery can operate normally, 1/2/3/4 lights flashing green light corresponding to 0 ~ 25% / 25% ~ 50% / 50% ~ 75% / 75% ~ 100% remaining; If it flashes red, the battery pack needs to be charged.

2. Press and hold the red button, push the battery pack forward along the socket slide on the wheelchair, push to the end and release the button, at this time the battery pack is locked on the socket.

3. Press the power button, the SOC LED will flash green, and the battery pack department is operating normally.

4.When you need to remove the battery pack, press and hold the red button while pulling out the battery pack back.