English
English
Español
Português
русский
français
日本語
Deutsch
Italiano
Nederlands
ไทย
Polski
한국어
Svenska
magyar
Malay
Dansk
Suomi
Türk
Gaeilge
عربى
Indonesia
norsk
اردو
čeština
Ελληνικά
Українська
Burmese
български
Қазақ
slovenský
Eesti Keel
Română
Slovenski
Српски
Esperanto
Afrikaans
icelandic
יידיש
Беларус
Hrvatski
Kreyòl ayisyen
Shqiptar
ქართული
Кыргыз тили
Gàidhlig
Точик
O'zbek
հայերեն
Lëtzebuergesch
Malagasy
48V 100Ah(5.12kWh) ZK HS05-05 Rack-Mounted LiFePO4 Battery
Product name: 48V 100Ah(5.12kWh) ZK HS05-05 Rack-mounted LiFePo4 battery, manufactured with Grade A Lifepo4 Prismatic Cell.
Product Description
Rack-Mounted LiFePO4 Battery
Product Parameter:
1: Product name: 48V 100Ah(5.12kWh) ZK HS05-05 Rack-mounted LiFePo4 battery, manufactured with Grade A Lifepo4 Prismatic Cell
2: BMS Built-in: Smart 16S 100A BMS, reliable BMS System with circuit breaker and Air circuit breaker.
A: circuit breaker: communication with BMS, with protection functions with short circuit protection, voltage protection, current protection, capacity protection, temperature protection, equalization function
B: Air circuit breaker: If the current in the circuit exceeds the rated current switch that will automatically disconnect
3: Maximum Discharge: 100A (1C),
4: Maximum Charge: 50A
5: Display: LCD screen
6: Switch: ON/OFF switch, Reset switch: Reduce BMS self-damage and reset
7: Connection: Max. 16 Unit in Parallel
8: Communication protocol: RS485/RS232/CAN
9: Charging Temperature: 0~45°C (32~113°F)
10: Discharging Temperature: -20~60°C (-4~140°F)
11: Cycle Life: ≥6000 Cycles
12: Weight: 48Kg
13: Dimension (Length*Width*Height): 480*484*180mm
Case Structure of Battery Pack
| No. | Item | Functional Description | Remark |
| 1 | Battery+ | Positive terminal | |
| 2 | Battery- | Negative terminal | |
| 3 | With LCD | ||
| 4 | With LCD | ||
| 5 | Handle | ||
| 6 | Hanger | For mounting the battery pack | |
| 7 | Switch | ON/OFF | |
| 8 | RST | On/OFF /Reset button | |
| 9 | RUN | Working indicator light | Display state information |
| 10 | ALM | ALM alarm indicator light | Red-trouble-light on |
| 11 | ADS | Battery address dialer | Display connection address |
| 12 | CAPACITY | Capacity volume indicator | Display the battery's capacity |
| 13 | Dry contact | DO | Normal close |
| 14 | RS485 | RS485 communication interface | RS485connection port-A |
| 15 | CAN port | CAN | CAN communication port |
| 16 | RS232 port | RS232 | RS232 communication port |
| 17 | RS485 port | RS485B |
Battery Pack Specification
| No. | Item | General Parameter | Remark | |
| 1 | Combination method | 16S1P | ||
| 2 | Rated Capacity | Typical | 100Ah | Standard discharge after Standard charge（package) |
| Minimum | 100Ah | |||
| 3 | Factory Voltage | 48V-49.5V | Mean Operation Voltage | |
| 4 | Voltage at end of Discharge | 42V | Discharge Cut-off Voltage | |
| 5 | Charging Voltage | 54V | ||
| 6 | Internal Impedance |
≤20mΩ Internal resistance measured at AC 1KHZ after 50% charge |
The measure must uses the new batteries that within one week after shipment and cycles less than 5 times | |
| 7 | Standard charge | Constant Current 20A, Constant Voltage see No.5 0.02CA cut-off. | Charge time : Approx 6 h | |
| Limiting current | 20A | |||
| 8 | Standard discharge | Constant current: 20A, end voltage see NO.4 | ||
| 9 | Maximum Continuous Charge Current | 100A | T≥10ºC | |
| 10 | Maximum Continuous Discharge Current | 100A | T≥10ºC | |
| 11 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. Bare Cell | |
| Discharge : -20~55℃ | ||||
| 12 | Storage Temperature Range | Less than 12 months: -10~35℃ | 60±25%R.H. at the shipment state | |
| Less than 3 months: -10~45℃ | ||||
| Less than 7 day: -20~65℃ | ||||
| 13 | Dimensions | 442*480*133mm | Include case | |
| 14 | Weight | 49.5kg | Include case | |
