Home PRODUCTS Home Energy Storage System 48V 200Ah(10.24kWh) ZK HS05-10 Rack-Mounted LiFePO4 Battery

PRODUCTS

New Products

48V 200Ah(10.24kWh) ZK HS05-10 Rack-Mounted LiFePO4 Battery

Product name: 48V 200Ah(10.24kWh) ZK HS05-10 Rack-mounted LiFePo4 battery, manufactured with Grade A Lifepo4 Prismatic Cell

Send Inquiry

Product Description

Product Parameter:

1: Product name: 48V 200Ah(10.24kWh) ZK HS05-10 Rack-mounted LiFePo4 battery, manufactured with Grade A Lifepo4 Prismatic Cell

2: BMS Built-in: Smart 16S 200A BMS, reliable BMS System with circuit breaker and Air circuit breaker.

A: circuit breaker: communication with BMS, with protection functions with short circuit protection, voltage protection, current protection, capacity protection, temperature protection, equalization function

B: Air circuit breaker: If the current in the circuit exceeds the rated current switch that will automatically disconnect

3: Maximum Discharge: 200A

4: Maximum Charge: 200A

5: Display: LCD screen

6: Switch: ON/OFF switch, Reset switch: Reduce BMS self-damage and reset

7: Connection: Max. 16 Unit in Parallel

8: Communication protocol: RS485/RS232/CAN

9: Charging Temperature: 0~45°C (32~113°F)

10: Discharging Temperature: -20~60°C (-4~140°F)

11: Cycle Life: ≥6000 Cycles

12: Weight: 96Kg

13: Dimension(Length* Width*Height): 480*484*225mm

Case Structure of Battery Pack

No.	Item	Functional Description	Remark
1	Battery+	Positive terminal
2	Battery-	Negative terminal
3			With LCD
4			With LCD
5	Handle
6	Hanger		For mounting the battery pack
7	Switch	ON/OFF
8	RST	On/OFF /Reset button
9	RUN	Working indicator light	Display state information
10	ALM	ALM alarm indicator light	Red-trouble-light on
11	ADS	Battery address dialer	Display connection address
12	CAPACITY	Capacity volume indicator	Display the battery's capacity
13	Dry contact	DO	Normal close
14	RS485	RS485 communication interface	RS485connection port-A
15	CAN port	CAN	CAN communication port
16	RS232 port	RS232	RS232 communication port
17	RS485 port	RS485B

Battery Pack Specification

No.	Item	General Parameter		Remark
1	Combination method	16S2P
2	Rated Capacity	Typical	200Ah	Standard discharge after Standard charge（package)
		Minimum	200Ah
3	Factory Voltage	48V-49.5V		Mean Operation Voltage
4	Voltage at end of Discharge	42V		Discharge Cut-off Voltage
5	Charging Voltage	54V
6	Internal Impedance	≤20mΩ Internal resistance measured at AC 1KHZ after 50% charge		The measure must uses the new batteries that within one week after shipment and cycles less than 5 times
7	Standard charge	Constant Current 40A, Constant Voltage see No.5 0.02CA cut-off.		Charge time: Approx 6 h
	Limiting current	20A
8	Standard discharge	Constant current: 40A, end voltage see NO.4
9	Maximum Continuous Charge Current	100A		T≥10ºC
10	Maximum Continuous Discharge Current	100A		T≥10ºC
11	Operation Temperature Range	Charge: 0~45℃		60±25%R.H. Bare Cell
		Discharge : -20~55℃
12	Storage Temperature Range	Less than 12 months: -10~35℃		60±25%R.H. at the shipment state
		Less than 3 months: -10~45℃
		Less than 7 day: -20~65℃
13	Dimensions	442620222mm		Include case
14	Weight	87.5kg		Include case