Home PRODUCTS Home Energy Storage System HS04 Solar Energy Storage Inverter Control Integrated Machine

PRODUCTS

New Products

HS04 Solar Energy Storage Inverter Control Integrated Machine

HS04 series is a new type of hybrid photovoltaic energy storage inverter control system integrating solar energy storage & Grid charging energy storage and AC sine wave output.

Send Inquiry

Product Description

Solar Energy Storage Inverter Control Integrated Machine

Product introduction of HS04 Solar Energy Storage Inverter Control Integrated Machine

HS04 series is a new type of hybrid photovoltaic energy storage inverter control system integrating solar energy storage & Grid charging energy storage and AC sine wave output. It adopts DSP control and advanced control algorithm, with high response speed, high reliability and high reliability. Features such as high industrialization standards. There are four optional charging modes: solar only, Grid priority, solar energy priority, and Grid & solar; two output modes of inverter and Grid are optional to meet different application needs.

Product feature of HS04 Solar Energy Storage Inverter Control Integrated Machine

1. Adopt fully digital voltage and current double closed-loop control, advanced SPWM technology, output pure sine wave.

2. It has two output modes of grid bypass and inverter output, and has the function of uninterrupted power supply.

3. There are 4 charging modes to choose from: solar only, grid priority, solar priority, and hybrid charging.

4. LCD liquid crystal screen design, dynamic display system data and operating status.

5. It has the function of power saving mode to reduce no-load loss.

6. Adopt intelligent adjustable speed fan, efficient heat dissipation and prolong system life.

7. With multiple protection functions, 360° all-round protection.

8. Has complete short-circuit protection, over- and under-voltage protection, overload protection, back-feed protection, etc.

Product connection diagram

Solar Energy Storage Inverter Control Integrated Machine

1	LCD Screen	8	RS485Communication port
2	indicator light	9	USB Communication port
3	touch button	10	DC12V output
4	switch	11	USB output
5	Power lamp	12	AC output
6	AC input/output, PV input	13	disconnector
7	Node port

Specifications

Grid module
Rated input voltage	220/230Vac
Input voltage range	(170Vac~280Vac) ±2% (90Vac-280Vac)±2%
frequency	50Hz/ 60Hz (Automatically detects)
Frequency range	47±0.3Hz ~ 55±0.3Hz (50Hz); 57±0.3Hz ~ 65±0.3Hz (60Hz);
Overload/short circuit protection	disconnect
efficiency	>95%
Transfer time (bypass and inverter)	10ms (Typical value)
AC backfill protection	YES
Maximum bypass overload current	40A
Inverter module
Output voltage waveform	pure sine wave
Rated output power	5000 (VA)
Power Factor	1
Rated output voltage	230Vac
Output voltage error	±5%
Output frequency range	50Hz ± 0.3Hz 60Hz ± 0.3Hz
Efficiency	>92%
Overload protection	(102%< load <125%) ± 10%: report an error and shut down the output after 5 minutes; (125%< load <150%) ± 10%: report an error and shut down the output after 10 seconds; Load >150% ± 10%: report an error and shut down the output after 5 seconds;
peak power	10000VA
On-load motor capacity	4HP
Output short circuit protection	breaker
Bypass Breaker Specifications	40A
Battery voltage range	40.0Vdc~60Vdc ± 0.6Vdc (Under-voltage alarm / shutdown voltage / the over-voltage alarm/over-voltagerenew…LCD Screen can be set)
Power saving mode	load≤50W
Grid charging
maximum-charging current (can be set)	60A
Charging current error	±5Adc
charging voltage range	40 – 58Vdc
Short circuit protection	Circuit breakers and blown fuses
Circuit Breaker Specifications	40A
Overcharge protection	Alarm minute and turn off charging after 1
Solar change
Maximum PV, Open circuit voltage	145Vdc
PV Operating voltage range	60-145Vdc
MPPT voltage range	60-115Vdc
Battery voltage range	40-60Vdc
Maximum input power	4400W
Solar charging current range (can be set)	0-80A
Charging short circuit protection	blow fuse
Wiring protection	reverse polarity protection
Maximum Hybrid Charge Current( PV+AC)
Maximum hybrid charge Current (can be set)	0-140A
Other Specification
Range of working temperature range	-15°C to 55°C
Storage temperature range	-25°C ~ 60°C
Humidity range	5% to 95% (Three anti-paint protection)
Noise	≤60dB
Heat dissipation	Forced air cooling, adjustable wind speed
Communication interface	USB/RS485(WiFi/GPRS)/Dry Node Control